What Is Ghost Immobiliser And Why Is Everyone Dissing It?

Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern thieves can steal a vehicle within a matter of minutes. They use the cars OBD port to hack the ECU & then duplicate a new key, all using a hidden laptop in the car.

The Autowatch Ghost immobiliser prevents this by sending pin codes to the buttons on your vehicle (steering wheels & central console). It is completely inaccessible to anyone else in your vehicle.

There are no key fobs or LED indicators or other ways of locating the vehicle are in place.

The ghost immobiliser is a great method to protect against keyless entry theft and key copying. This device safeguards your vehicle from these types of attacks by blocking the engine after the valid pin code has been entered. This is an extremely efficient method of protecting your vehicle, and insurance companies see it as a safety measure that can reduce the cost of your insurance.

The way the ghost works is by connecting to your vehicle's CAN data network. Once installed by us at Car Theft Solutions it will only start when you enter a specific button sequence using your personalised override code. The engine will not start if you try to start your vehicle without the code. The thief will then realise that they have been caught and is likely to get out of the vehicle and run off.

One of the major advantages of this system is that it does not transmit any signals, like a tracker, this means that thieves cannot utilize RF signal receivers in order to determine the location of your Ghost device. It also doesn't transmit any IR (infrared) signals like the usual remote control key fobs or tracker do, making it difficult to deceive or hack.

The Ghost also comes with the valet-mode, which is activated if you are handing your vehicle to a valet for parking or service. This will turn off the immobiliser on the CAN for 30mph and allow you to use the vehicle as normal with your key fob or mobile app. If the vehicle is parked up again, the Ghost will return to full functionality.

Car Theft Solutions is the place to contact If you'd like to learn more about Ghost, or should you wish to have it installed in your vehicle. We are a family-run business with more than 10 years of experience in security for vehicles. This includes the Ghost immobiliser installation. We are an approved installer for Ghost products and our reputation is built on the satisfaction of our customers.

No hacking, cloning, or cloning

The Autowatch Ghost immobiliser is one of the most advanced models available. It safeguards your vehicle from hacking and key cloning, making it nearly impossible to take. The only way to steal your car is to physically tow it away. Even then, they wouldn't be able start the engine.

This is because, unlike other immobilisers that only stop the vehicle from starting if they don't have your fob, this system actually shuts off your engine control unit so that the vehicle is unable to start. The system communicates an alert via buttons on the steering wheel, door panel or centre console. It can only be disarmed with the correct pin code configuration.

Its sleek and subtle design allows it to be seamlessly into your vehicle without the requirement for additional keys or LED indicators. It operates independently of your factory tracker or alarm. It is a CAN-bus immobiliser, meaning that it is part of the vehicle's control network and does no interfere with other devices, such as your vehicle's key fob or alarm.

This exclusive technology is not visible to thieves, unlike other systems that use codes and RF scanning. It only transmits pin codes that are silently transmitted through the buttons on your car's steering wheel, door panels, or central console. The Ghost is a groundbreaking product that safeguards your vehicle from theft of keyless entry and smart key theft. It does this by generating an individual pin code which needs to be entered to disable the device.

The number of vehicles that have no keyless entry that are on the road is growing. Thieves are getting more sophisticated and use devices for cloning that can be purchased online or in classifieds for less than PS15. They can then use this fob that was cloned to gain entry to your vehicle. A standard immobiliser for vehicles only prevents the engine from starting only if you have the original key fob, this does not offer enough security and is easy for criminals to alter or jam signals to gain access to the vehicle.

Valet mode

Standard immobilisers that are fitted to your car use an electronic chip that sends an indication. The system will look for the code that was sent by the key to start the car. If the proper signal isn't received, the system will simply cut off and stop the engine from beginning. This is the basic principle behind all immobilisers that are sold on the market and is a crucial security measure to ensure that your vehicle cannot be stolen, even if a burglar has your keys or a device that can enhance the signal of your key fob.

Ghost immobilisers do more than stop this. The system, which is on the CAN bus of your Mercedes, is programmed with a unique PIN code ghost immobiliser installation that needs to be entered in order to start the vehicle. The app is then locked your application and nobody will ever be able to access it unless they have the same unique pin you have.

The system also stops cloning, hacking and signal jamming (which can be used by thieves to get around the immobiliser on your vehicle). If a burglar gets their hands on your car keys or key fob, they won't be able start your vehicle even if it is located nearby. They may only be able to steal your car onto the flatbed truck and that's highly unlikely.

Valet mode is a useful feature that comes with your ghost immobiliser. When activated, the glove box and trunk will be locked, so that anyone stealing your car won't have any personal belongings to take. It will also limit the speed of your Tesla so that it can't be driven at speeds of more than 70mph, and it will also disable the ridiculous mode. It will also block your driver profiles and conceal your home and work addresses so that nobody other person can access your private data on your Tesla dashboard.

If you wish to make use of your car for valet parking or service purposes, simply select the 'Valet/Service' option on your dashboard application and enter your 4-digit valet pin on the touchscreen. The alarm will cease to work, however the car won't start unless you enter a valid pin. This is ideal for those who need to give their vehicle over to others, such as garage mechanics and taxi drivers.

The first aftermarket CAN bus immobiliser

The Autowatch Ghost offers unparalleled security and is the only aftermarket CAN-bus immobiliser available in the world. It guards against key hacking or cloning, and even the theft of keys. It does this through the vehicle's current interface. It does not require additional remotes or fobs however, it instead connects to the vehicle's data network, CAN. This makes it a discreet gadget.

The device is an in-built circuit board that connects to the engine management system in your car (ECU) and works silently. Once activated, it will stop the car from starting unless the PIN is entered. This is a unique code that you will receive when you make an appointment for installation. This number will be required to activate valet mode, disable the alarm, or permit you to leave in your friends car (if they have a Ghost installed as well).

It is designed to be invisble from the interior of your car. It does not emit radio signals, and only produces sounds when it is activated. It can be put in a variety of places which makes it virtually impossible to identify. It is also low-maintenance and can be used together with other systems, such as a tracker (Brand dependent) to provide a more complete anti-theft solution.

Many people install ghost immobilisers because they believe that the standard security measures are not sufficient to safeguard their pride and joy. While physical deterrents such as steering wheel locks and wheel clamps are a good alternative, they aren't necessarily considered "theft proof" by thieves as they can be defeated quite easily using the appropriate tools. A ghost immobiliser can't, however, be bypassed by a thief since it is concealed inside the vehicle. Its activation activated, it would shut down parts like the starter motor or fuel system.

A ghost immobiliser is installed for just PS450 It's a fraction of what other products cost. It also stops your vehicle from being taken. So if you want an extra layer of security to make sure that your vehicle is safe and sound call us now and we'll get it booked in for you. We accept credit cards and offer a 3-month interest-free credit with Klarna.

Leave a Reply

Your email address will not be published. Required fields are marked *